Torque Information

• Iso 4762 M8
• Iso 4762 Pdf

1. ISO 4762 Hexagon socket Head Cap Screws Dimensions, Specifications, Standard, Weights, Equivalent and Download PDF.
2. Bolt torque calculator metric( vdi 2230) Bolt torque calculator metric. DIN 908, DIN 912, DIN 931, DIN 933, DIN 934, DIN 960, DIN 961, DIN 985, ISO 10642, ISO 4014, ISO 4017, ISO 4032, ISO 4762, ISO 7040, ISO 8676, ISO 8765, MBN 10105. In section Head Size and Type either select one fastener ISO with the 'Select Standard for Type' option.
3. General Fastener Standards Note: The following table is provided for guidance only as there are often dimensional variations between standards. Click on the column headers to change the order of the table.
4. ISO 4762 and DIN 912 has the same material, dimensions, length tolerance, thread length, torque etc. ISO 4762 International Standard specifies the characteristics of hexagon socket head cap screws with coarse pitch thread from M1,6 up to and including M64 and product grade A.
5. DIN 912 / ISO 4762 Socket Head Cap Screws. 8.8 Grade Bare Steel/Zinc Plated. Torque Information. Torque Information. Adjustment of Torque for Tightening Method and Friction Coefficient. Two major points have to be accounted for when installing a fastener. Inaccuracy of torque wrench tightening method can range anywhere from ±17 to ±23%.
6. ISO 4762, Hexagon socket head cap screws ISO 6892, Metallic materials — Tensile testing at ambient temperature ISO 7093-1, Plain washers — Large series — Product grade A ISO 8673, Hexagon nuts, style 1, with metric fine pitch thread — Product grades A and B.

Nch switch software. Many DIN standards have been the basis for ISO standards. There have often been minor adjustments when the previous DIN standards have been changed to current ISO standards. If an ISO standard is implemented on national level without any changes, the same designation as the corresponding ISO standard is given to the national standard.

Adjustment of Torque for Tightening Method and Friction Coefficient

Two major points have to be accounted for when installing a fastener.

• 1. Inaccuracy of torque wrench tightening method can range anywhere from ±17 to ±23%
• 2. The friction coefficient changes when using lubrication on the thread.

1. Inaccuracy of tightening method

A torque wrench has a “scatter” (tolerance) of ±17% to ±23%. We must account for this in order not to over-tighten the fastener.

The accuracy of the tightening method needs to be accounted for, in order to not over-tighten the fastener.

2. Friction coefficient

The surface condition of a fastener may change the torque that can be applied and needs to be accounted for.

The accuracy of the tightening method, as well as the change in friction, needs to be accounted for in order not to over-tighten the fastener.

General Torque Figures

Iso 4762 M8

A torque value will be influenced by the fastening methods and tools used. The only way to determine an exact torque value is by actual application. The following figures are general guidelines only.

Figures in ft. lbs.

Torque – Metric Fasteners

Torque – Imperial Fasteners

Iso 4762 Pdf